Quad Bucket Seat Side Shield / Cup Holder - Flat Floor

QUAD BUCKET SEAT SIDE SHIELD / CUP HOLDER - FLAT FLOOR

REMOVAL

Fig. 103:

1. Remove molded rubber liner by lifting it up out of cup holder.

INSTALLATION

1. Drop molded rubber liner into cup holder. Seat upper liner rubber tabs into square holes in cup holder upper shelf
2. Hold flap and spring assembly in the horizontal position and snap into cup holder flap retaining tabs.
3. Verify cup holder flap operation several times to ensure proper operation. Flap should fold downward with little effort and spring back to a horizontal position when released.