Component Tests and General Diagnostics

DIAGNOSIS AND TESTING - TIRE PRESSURE SENSOR

NOTE: Tire pressure may increase from 2 - 6 psi (14 - 41 kPa) during normal driving conditions. Do NOT reduce this normal pressure build up.

If a fault in the system is detected, always check air pressure in the tires first with a known accurate air gauge and correct the inflation pressure. If any tire is low, inspect all tires.

If gauge-read pressure in the tires does not reflect the reading on the EVIC, retrain the sensors, then reevaluate. Refer to the appropriate diagnostic information for complete diagnosis of the Tire Pressure Monitoring System.