Intermediate Shaft, M/T
BLOCKER RING WEAR GAP1st Gear 0.66 - 1.84 mm (0.0026 - 0.072 inch)
2nd Gear 0.66 - 1.84 mm (0.026 - 0.072 inch)
5th Gear 0.86 - 1.54 mm (0.034 - 0.061 inch)
Reverse 0.77 - 1.63 mm(0.030 - 0.064 inch)
GEAR END PLAY
1st Gear 0.091 - 0.828 mm (0.004 - 0.033 inch)
2nd Gear 0.051 - 0.787 mm (0.002 - 0031 inch)
5th Gear 0.102 - 0.762 mm (0.004 - 0.030 inch)
Reverse 0.066 - 0.805 mm (0.003 - 0.0317 inch)