Operation CHARM: Car repair manuals for everyone.

Instruments - Erratic Lamp Illumination on Non ABS Cars

NUMBER: 08-015-04

GROUP: Electrical

DATE: April 27, 2004

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-021-03 DATED JUNE 27, 2003 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES CORRECTING THE SUBJECT.

SUBJECT:
ABS, BRAKE, TRAC OFF and Security/Vehicle Theft Alarm (VTA) Cluster Lamps Illuminated on Vehicles not Equipped with ABS Brakes or **SKIM**.

OVERVIEW:

This bulletin involves using the DRBIII(R) to clear the instrument cluster of all learned features instead of replacing the instrument cluster.

MODELS:
2001 - 2003 (RS) Town & Country/Caravan/Voyager

SYMPTOM/CONDITION:

Vehicles not equipped with ABS brakes may have the ABS, BRAKE, and TRAC OFF lamps illuminated on the instrument cluster or vehicles not equipped with Sentry Key Immobilizer (SKIM) may have the Security/VTA lamp illuminated on the instrument cluster.

DIAGNOSIS:

If the condition is present, perform the Repair Procedure.





EQUIPMENT REQUIRED

NOTE:
THE DRBIII(R) MUST BE AT LEVEL 55.0 OR HIGHER AND THE MDS2(R) AT CD 2111 OR HIGHER TO PERFORM THE REPROGRAMMING.

REPAIR PROCEDURE:

1. Connect the DRBIII(R) to the vehicle diagnostic connector, using cable CH7000.

2. Turn the ignition key to the ON position (engine off).

3. From the DRBIII(R) Main Menu, select # 1 - DRBIII(R) Standalone

4. Select # 1 - 1998 - 2005 Diagnostics

5. Select # 1 - All

6. Select # 3 - Body Interior

7. Select # 2 - Electro/Mech Cluster (MIC)

8. Select # 9 - Miscellaneous

9. Select # 1 - Reset Learned Features

10. Follow the directions on the DRBIII(R) screen.

11. When the DRBIII(R) returns to the Miscellaneous Menu, select # 2 - Reset Module.

12. Erase fault codes using the DRBIII(R).

13. Disconnect the DRBIII(R) from the vehicle.

14. Verify the ABS, BRAKE, TRAC OFF, and Security lamps are no longer illuminated.

POLICY:

Reimbursable within the provisions of the warranty.





TIME ALLOWANCE





FAILURE CODE

Disclaimer

This bulletin is supplied as technical information only and is not an authorization for repair.