Bench Seat Back Flat Floor
BENCH SEAT BACK FLAT FLOORREMOVAL
NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.
1. Remove the headrests.
2. Remove the armrests, if equipped.
3. Remove the upper hinge cover.
4. Disengage synchronizing cable housing from seat back hinge, if equipped.
5. Disengage synchronizing cable end from (clip on left side) hinge latch release arm, if equipped.
Fig. 94:
6. Remove shoulder bolts attaching seat back hinge to seat back frame (Fig. 94).
7. Remove the seat back.
INSTALLATION
NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.
1. Install the seat back.
2. Install the shoulder bolts attaching the seat back hinge to the seat back frame and tighten to 34 N.m (25 ft.lbs.) torque.
3. Connect the synchronizing cable end from (clip on left side) hinge latch release arm, if equipped.
4. Connect the synchronizing cable housing to the seat back hinge, if equipped.
5. Install the upper hinge cover.
6. Install the armrests, if equipped.
7. Install the headrest sleeves.
8. Adjust synchronizing cable, if equipped.