Seat Cushion Cover - Quad Bucket, 50 / 50 Split, Bench Flat Floor

SEAT CUSHION COVER -QUAD BUCKET, 50 / 50 SPLIT, BENCH FLAT FLOOR

REMOVAL

BENCH SEAT & 50 / 50 SPLIT

1. Remove seat from vehicle.
2. Remove seat back.
3. Remove seat risers.
4. Disconnect the cushion cover J-straps.
5. Remove seat cushion cover from seat cushion.

QUAD BUCKET

1. Remove seat from vehicle.
2. Remove seat back.
3. Remove seat risers.
4. Disconnect the cushion cover J-straps.
5. Remove seat cushion cover from seat cushion/pad from cushion frame.

INSTALLATION

BENCH SEAT & 50 / 50 SPLIT

NOTE: On cloth trimmed seats, the cushion cover does not separate from the cushion foam pad.

1. Position the seat cushion cover/pad onto the cushion frame.
2. Engage the J-strap retainers.
3. Steam wrinkles from seat cushion, if necessary.
4. Install seat risers.
5. Install seat back.
6. Install seat into vehicle.