Left B-Pillar Switch Replacement

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Using a trim stick or other small flat-bladed pry tool, gently pry the leading upper edge of the B-pillar switch away from the B-pillar trim.
3. Once the upper edge is free from pillar trim, rock the switch out of the switch opening.
4. Disconnect the B-pillar switch electrical connector. First, slide the connector lock away from the switch then, depress connector retaining tab while pulling straight apart.
5. Remove the B-pillar switch from the vehicle.

INSTALLATION
1. Connect the B-pillar switch electrical connector. Slide connector lock toward the switch to lock in place.
2. Hook the lower edge of the B-pillar switch on the B-pillar trim and then push the switch firmly into position
3. Connect the negative battery cable.