Hazard Warning Lamps: Service and Repair

REPEATER LAMP - EXPORT

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Push the side repeater lamp to one side and release retaining tab.
3. Pull side repeater lamp out and disengage bulb socket from lamp.
4. Depress, then rotate and pull bulb from socket.

INSTALLATION
1. Install bulb to socket.
2. Push lamp socket into the side repeater lamp.
3. Position side repeater lamp to hole in fender.
4. Push side repeater lamp to one side and seat retaining tab into fender.
5. Connect battery negative cable.