Marker Lamp: Service and Repair
FRONT POSITION LAMP - EXPORTFig.11 Front Position Lamp:
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the headlamp unit.
3. Remove the plastic cover from the back of the headlamp unit.
4. Pull front position lamp socket from headlamp unit.
5. Pull bulb straight out of socket.
INSTALLATION
1. Push bulb into the bulb socket.
2. Insert bulb socket into headlamp unit.
3. Install cover to the back of the headlamp unit.
4. Install the headlamp unit.
5. Connect the battery negative cable.