Fog/Driving Lamp: Adjustments

FOG LAMP UNIT ALIGNMENT

Front Fog Lamp Unit Alignment:

Prepare an alignment screen (Refer to ELECTRICAL/LAMPS/LIGHTING -
EXTERIOR/HEADLAMP UNIT - STANDARD PROCEDURE). A properly aligned fog lamp will project a pattern on the alignment screen 100 mm (4 in.) below the fog lamp center line and straight ahead. To improve visual interpretation of the fog lamp pattern on the alignment screen, the headlamps should be in the "off" position.

The fog lamps are adjusted by a adjustment screw located through the lens on Dodge vehicles, and by a knob on the back of the lamp on Chrysler vehicles.

FRONT FOG LAMP UNIT ALIGNMENT- EXPORT

Fog Lamp Unit Alignment - Export:

Prepare an alignment screen (Refer to ELECTRICAL/LAMPS/LIGHTING -
EXTERIOR/HEADLAMP UNIT - STANDARD PROCEDURE). A properly aligned fog lamp will project a pattern on the alignment screen 200 mm (8 in.) below the fog lamp center line and straight ahead. To improve visual interpretation of the fog lamp pattern on the alignment screen, the headlamps should be in the "off" position.

The fog lamps are adjusted by a adjustment screw located on the underside of the fog lamp unit.