Rear Quarter Panel Trim - Convertible
REAR QUARTER PANEL TRIM - CONVERTIBLEREMOVAL
1. Fold rear seats flat.
2. Remove attaching screw (2) from left and right rear seat fold forward check strap (1).
3. Remove rear seat pivot bezels and striker bezel.
4. Remove rear seat.
5. Remove rear seat lower seat belt anchor attaching bolt.
6. Release J-strap at upper seat back slingwell.
7. Remove bolster from rear seat back support and move bolster out of the way.
8. Remove lower seat belt anchor at B-pillar.
9. Remove turning loop anchor attaching bolt.
10. Move door sill scuff plate to allow removal of quarter trim panel.
11. Remove screws attaching quarter trim panel.
12. Remove quarter trim panel.
INSTALLATION
1. Place quarter trim panel into position.
2. Install screws attaching quarter trim panel.
3. Install door sill scuff plate.
4. Install turning loop anchor attaching bolt.
5. Install lower seat belt anchor at B-pillar.
6. Install bolster to rear seat back support.
7. Connect J-strap at upper seat back slingwell.
8. Install rear seat lower seat belt anchor attaching bolt.
9. Install rear seat.
10. Install rear seat pivot bezels and striker bezel.
11. Install attaching screw (2) to left and right rear seat fold forward check strap.
12. Place rear seat in the upright position.