Shroud

SHROUD UPPER/LOWER

REMOVAL
1. Fold down and remove the knee blocker panel below steering column.
2. Remove two column shroud retaining screws.





3. Separate upper and lower steering column shrouds and remove from vehicle.

INSTALLATION
1. Connect the upper and lower steering column shrouds.

NOTE: Ensure that the locking tabs on the inboard and outboard sides of the shrouds are secure.

2. Install the two column shroud retaining screws. Torque steering column shroud retaining screws to 2 Nm (18 inch lbs.).
3. Install the knee blocker panel below the steering column.