Rear Seat Back Cushion Cover/Foam - Convertible

REAR SEAT BACK CUSHION COVER/FOAM - PT-27 - CONVERTIBLE

REMOVAL




1. Remove seat from vehicle.
2. Remove seat back.
3. Disengage J-strap attaching seat cover from the seat cushion frame.
4. Pull cover off to the hog rings.
5. Cut hog rings (2) attaching seat cover to seat cushion pad.




6. Remove seat cushion cover and foam from seat cushion frame.

INSTALLATION




1. Place seat cushion cover and foam onto seat cushion frame.




2. Pull cover into position to install hog rings (2).
3. Engage J-strap attaching seat cover the seat cushion.
4. Install seat back.
5. Install rear seat into vehicle.