Sentry Key Immobilizer System (SKIS)

The SKIS is an immobilizer system designed to prevent unauthorized vehicle operation. The system consists of a Sentry Key Immobilizer Module (SKIM) and ignition key(s) called Sentry Key(s) which are equipped with a transponder chip. The SKIM communicates over the Programmable Communication Interface multiplex system (PCI) bus network to the instrument cluster, Powertrain Control Module (PCM), and the DRBIII(R) scan tool.

The SKIM sends messages to the instrument cluster over the PCI bus to control the VTSS indicator lamp. The SKIM sends a message to the instrument cluster to turn the lamp on for about three seconds when the ignition is turned to the Run/Start position as a bulb test. If the indicator lamp comes on and stays on after the bulb test, it indicates that the SKIM has detected a system malfunction and/or that the SKIS has become inoperative. If an invalid key is detected in the ignition key cylinder with the ignition switch in the Run/Start position the SKIM will flash the VTSS indicator lamp on and off.

For additional information on the SKIS, refer to the Powertrain Diagnostic Procedures manual.