Trunk Trim Panel - Convertible
TRUNK TRIM PANEL - CONVERTIBLEREMOVAL
1. Remove decklid sill scuff plate (3). Refer to Trim Panel.
2. Disconnect power outlet/cargo lamp, if equipped.
3. Remove push pin fastener (1) attaching trunk side trim panel (2).
4. Pull inward on trunk side trim panel (2) to disengage clips.
5. Remove trunk side trim panel (2) from vehicle. Repeat operation for other side.
INSTALLATION
1. Place trunk side trim panel into position (2).
2. Push clips on trunk side trim panel (2) to the seated position.
3. Install push pin fastener (1).
4. Connect power outlet/cargo lamp, if equipped.
5. Install decklid sill scuff plate, trunk trim panel (2), and trunk plug (1).