Rear Seat Bolster - Convertible

REAR SEAT BOLSTER - CONVERTIBLE

REMOVAL




1. Lower convertible top.
2. Fold rear seats down and forward.
3. Remove left rear seat belt lower anchor.
4. Remove right rear seat belt lower anchor.
5. Remove push pin fasteners attaching molding upper seat belt to top well.
6. Remove two screws from front side upper bolster assembly to rear seat back panel (3).
7. Remove two screws (1) from the rear attaching upper bolster (2) assembly to rear seat back panel.




8. Remove both bezels at seat belt through holes in headrest assembly.
9. Fish right and left seat belt through bolster assembly.
10. Remove rear seat bolster (1) from vehicle.

INSTALLATION




1. Place bolster (1) into vehicle.
2. Install right and left seat belt through bolster assembly.
3. Install both bezels at seat belt through holes in headrest assembly.
4. Install two screws from the rear attaching upper bolster assembly to rear seat back panel (2).




5. Install two screws (1) from front side upper bolster assembly to rear seat back panel (2).
6. Install push pin fasteners attaching molding upper seat belt to top well.
7. Install right rear seat belt lower anchor.
8. Install left rear seat belt lower anchor.
9. Place rear seats in the upright position.
10. Raise convertible top.