Splash Guard: Service and Repair
SPLASH SHIELD - RIGHT SIDE RAILREMOVAL
1. Raise and support the vehicle.
2. Remove the right front wheel.
3. Carefully pull the right side of the fascia (1) downward to gain access to the screw that secures the lower front of the right side rail splash shield (2) and remove the screw.
4. Remove the push-pin retainer that secures the front of the right side rail splash shield to the right wheelhouse splash shield.
5. Remove the push-pin retainer that secures the rear of the right side rail splash shield to front suspension assembly.
6. Remove the three screws that secure the top of the right side rail splash shield to front frame rail and remove the splash shield.
INSTALLATION
1. Position the right side rail splash shield (2) to the vehicle.
2. Install the three screws that secure the top of the right side rail splash shield to front frame rail.
3. Install the push-pin retainer that secures the front of the right side rail splash shield to the right wheelhouse splash shield.
4. Install the push-pin retainer that secures the rear of the right side rail splash shield to front suspension assembly.
5. Carefully pull the right side of the fascia (1) downward to gain access to the screw location that secures the lower front of the right side rail splash shield and install the screw.
6. Install the right front wheel.
7. Lower the vehicle.