Cluster Bezel

REMOVAL
1. Open hood.

Disconnect And Isolate Battery Negative Cable:

2. Disconnect and isolate the battery negative cable.
3. Remove the instrument panel top cover.
4. Remove the steering column cover.
5. Remove the left instrument panel end cap.

Instrument Cluster Bezel:

6. Grab the sides of the instrument cluster bezel and gently give a quick pull to unsnap the cluster bezel.

Turn Signal Indicator Lamps:

7. Disconnect the turn signal lamps from the instrument cluster bezel.
8. Remove bezel from vehicle.

If replacing the instrument cluster bezel, the A/C outlet housing assembly must be transferred to the new bezel.

INSTALLATION
1. Insert turn signal lamps into the instrument cluster bezel.
2. Position instrument cluster bezel in position making sure all fasteners are lined up with their respective slots.
3. Gently, but forcefully, snap the instrument cluster bezel into place.
4. Install the left instrument panel end cap.
5. Install the steering column cover.
6. Install the instrument panel top cover.
7. Connect the battery negative cable.
8. Close the hood.
9. Verify vehicle and system operation.