Rear Cargo Lamp Replacement

REMOVAL
1. Open liftgate.
2. Remove jack storage door from right rear quarter trim panel.
3. Remove jack and tool bag.

Rear Cargo Lamp:

4. Place right hand on stem of cargo lamp unit and pull downward until lens separates from the lamp unit.
5. Pull cargo lamp unit through jack storage door opening to access bulb.
6. Disconnect wire connector from cargo lamp unit.
7. Pull bulb from unit socket.

INSTALLATION
1. Push bulb into unit socket.
2. Snap lens onto lamp unit.
3. Move wire connector through lamp opening and connect wire connector to cargo lamp unit.
4. Place cargo lamp unit into opening and apply hand pressure to seat lamp unit into rear quarter panel.
5. Install jack and tool bag in the storage area.
6. Install jack storage door to the right rear quarter trim panel.
7. Close liftgate.