Vehicle Theft Security System

B210E-BATTERY VOLTAGE HIGH

WHEN MONITORED
With the ignition switch on.

SET CONDITION
The SKREEM has detected the Fused (B+) input voltage above a calibrated value.

POSSIBLE CAUSES
- Vehicle charging system
- SKREEM

Diagnostic Test

1. DETERMINING IF DTC IS CURRENT

CAUTION: Diagnose and repair all Powertrain DTCs before continuing.

Turn the ignition on.
With the scan tool, record and erase the SKREEM DTCs.
Perform 5 ignition cycles, leaving the ignition switch on for a minimum of 90 seconds per cycle.
Using the scan tool, read the SKREEM DTCs.

Q: Does the DTC reset?

YES: Replace and program the SKREEM. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests
NO: Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests