Retainer - Header Weatherstrip - Convertible

RETAINER - HEADER WEATHERSTRIP - CONVERTIBLE

REMOVAL




1. Remove the header and A-pillar weatherstrip. Refer to Weatherstrip.
2. Remove the five screws (1) that secure the weatherstrip header seal retainer (2) to the windshield opening frame (3) and remove the seal retainer.

INSTALLATION




1. Position the weatherstrip header seal retainer (2) onto the windshield opening frame (3).
2. Install the five screws (1) that secure the weatherstrip header seal retainer to the windshield opening frame. Tighten the screws to 2.2 N.m (20 in. lbs.).
3. Install the header and A-pillar weatherstrip.