B1931

B1931-RIGHT FRONT WINDOW POSITION SENSOR CIRCUIT PERFORMANCE

WHEN MONITORED
Whenever the module is awake.

SET CONDITION
When the Right Front Window Driver circuits are on but the module cannot detect hall sensor counts, this code will set.

POSSIBLE CAUSES
- Window motor
- Right window regulator module

Diagnostic Test

1. TEST FOR INTERMITTENT CONDITION

Turn the ignition on.
With the scan tool, record and erase DTC's
Try to operate the Right Front Window up and down several times.
Wait 30 seconds.
With the scan tool, read DTC's.

Q: Does the scan tool display B1931 -RIGHT FRONT WINDOW POSITION SENSOR CIRCUIT PERFORMANCE?

YES: Replace the Window Regulator Module Assembly. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: Operate the window motor several times. With the scan tool, read DTC's. If this DTC appears, replace the Window Regulator Module Assembly. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test