B2325

B2325-HEADLAMP WASHER MOTOR CONTROL CIRCUIT OPEN

WHEN MONITORED
With the ignition on.

SET CONDITION
When the FCM detects a short/HIGH condition.

POSSIBLE CAUSES
- Integrated power module

Diagnostic Test

1. INTEGRATED POWER MODULE

Turn the ignition off.
Replace the Wiper ON/OFF relay with a known good relay.
With the Scan Tool, clear all FCM DTC's.
Turn the Wipers ON then OFF.
With the Scan Tool, read the Wiper DTC's.

Q: Does the Scan Tool read: B2314-WIPER ON/OFF CONTROL CIRCUIT HIGH?

YES: Replace the Integrated Power Module. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: Test complete. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test