Alarm Module: Service and Repair
INTRUSION MODULEREMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover.
3. Remove the two screws (2) that secure the module (1) to the instrument panel.
4. Disconnect the module electrical connector (3).
5. Remove the module from the instrument panel.
INSTALLATION
1. Position the intrusion module (1) onto the instrument panel.
2. Install the two screws (2) that secure the module (1) to the instrument panel.
3. Connect the electrical connector (3) on the module (1).
4. Install the instrument panel top cover.
5. Connect the battery negative cable.