Instrument Panel Left End Cover Replacement

END CAP-INSTRUMENT PANEL

DRIVER SIDE

REMOVAL
1. Remove the steering column opening cover.
2. Remove the screw (1) that secures the driver side instrument panel end cap (2) to the instrument panel (3).
3. Using a trim stick C-4755 or equivalent, remove the driver side instrument panel end cap from the instrument panel by releasing the snap retainers from the instrument panel.
4. If equipped, disconnect the wire harness connector from the power mirror switch.
5. Remove the driver side instrument panel end cap from the vehicle.
6. If required, remove the power mirror switch from the driver side instrument panel end cap.

INSTALLATION
1. If removed, install the power mirror switch onto the driver side instrument panel end cap.
2. Position the driver side instrument panel end cap to the instrument panel and if equipped, connect the wire harness connector to the power mirror switch.
3. Install the driver side instrument panel end cap onto the instrument panel. Make sure the snap retainers are fully engaged to the instrument panel.
4. Install the screw that secures the driver side instrument panel end cap to the instrument panel. Tighten the screw to 2.2 N.m (20 in. lbs.).
5. Install the steering column opening cover.