Sunroof Trough Guide Assembly
SUNROOF TROUGH GUIDE ASSEMBLYREMOVAL
1. Remove the sunroof glass panel.
2. Place sunroof into the vent position.
3. Remove screws from the trough assembly one on each side.
4. Remove trough (1).
5. Disconnect the guide link (2).
6. Slide trough guide (1) forward and disengage the sliders (3) through the notches (2) in guide channels.
INSTALLATION
1. Carefully twist trough guide (1) through small slot (cut out) on track to install.
2. Connect the trough guide wire to the lifter arm.
3. Place the trough into position on sunroof. Ensure that the trough crosses over the top of the sunshade.
4. Install the two screws that attach the trough to the trough guides (1). Tighten screws to 1 N.m (9 in. lbs.).
5. Install sunroof glass panel.