Speed Sensor - Input

SPEED SENSOR - INPUT

REMOVAL

CAUTION: When disconnecting speed sensor connector, be sure that the connector weather seal does not fall off or remain in old sensor.

1. Disconnect the battery cables.





2. Remove air cleaner assembly (1).





3. Remove the battery hold down clamp and remove the battery (1).





4. Remove the battery tray (1).
5. Disconnect input speed sensor connector.





6. Unscrew and remove input speed sensor (1).





7. Inspect speed sensor o-ring (2) and replace if necessary.

INSTALLATION

CAUTION: When disconnecting speed sensor connector, be sure that the connector weather seal does not fall off or remain in old sensor.
1. Verify o-ring is installed into position.





2. Install and tighten input speed sensor to 27 Nm (20 ft. lbs.).
3. Connect speed sensor connector.
4. Install the battery tray (1).





5. Install the battery (1) and hold down clamp.





6. Install air cleaner assembly (1).
7. Connect battery cables.