Antenna Cable - Satellite Radio

ANTENNA CABLE - SATELLITE RADIO

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the D-pillar trim panel.
3. Remove the left rear quarter trim panel.
4. Lower the rear portion of the headliner as necessary to access the underside of the satellite antenna.
5. Detach the antenna cable (1) from the body harness. Disconnect wire harness connectors at each end of the cable.

INSTALLATION




1. Secure the antenna cable (1) to the body harness. Connect the wire harness connectors at each end of the antenna.
2. Install the headliner.
3. Install the left rear quarter trim panel.
4. Install the D-pillar trim panel.
5. Connect the battery negative cable.