Seat Track: Service and Repair
POWER SEAT TRACKREMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat from the vehicle and set face down on a clean surface.
3. Remove the bolts retaining the front riser and set the front seat riser aside.
4. Remove the bolts retaining the rear riser (3) and set the seat riser aside.
5. Remove the lower seat track cover (2) screws and set aside.
6. Remove the seat cushion side shields and set aside.
7. Disengage and disconnect the power seat wire harness from the power seat track.
8. Remove the power seat track retaining fasteners and remove the power seat track (1) from the seat.
INSTALLATION
1. Reinstall the power seat track (1) onto the seat cushion frame. Torque bolts to 28 N.m (21 ft. lbs).
2. Secure and connect the power seat wire harness on the power seat track (1).
3. Install the seat cushion side shields.
4. Install the lower seat track cover (2).
5. Install the bolts retaining the rear riser (3). Torque bolts to 28 N.m (21 ft. lbs).
6. Install the bolts retaining the front riser. Torque bolts to 28 N.m (21 ft. lbs).
7. Reinstall the power seat assembly into the vehicle. Torque bolts to 61 N.m (45 ft. lbs).
8. Reconnect the battery negative cable.