Rear Seat Back Cushion/Cover

REAR SEAT BACK CUSHION / COVER

REMOVAL




1. Remove seat from vehicle.
2. Remove rear seat cushion side shields.
3. Remove seat back.
4. Remove track assembly.




5. Disengage J-strap attaching seat cover from the seat cushion frame.
6. Pull cover off of the hog rings.
7. Cut hog rings attaching seat cover to seat cushion pad.
8. Remove seat cushion cover from seat cushion.

INSTALLATION




1. Position seat cover on cushion.
2. Align seat cover with cushion alignment indentations.
3. Install hog rings.
4. Engage J-strap attaching seat cover to front of seat cushion frame.
5. Install track assembly. Tighten front track to pan bolts to 12 N.m (9 ft. lbs.).




6. Install seat back.
7. Install rear seat cushion side shields.
8. Install seat in vehicle.