Rear Seat Bolster Cover - Convertible

REAR SEAT BOLSTER COVER - CONVERTIBLE

REMOVAL




1. Remove rear seat bolster from vehicle.
2. Remove the two bolster mounting brackets.
3. Remove push pin fasteners from upper retainer.




4. Cut three hog rings (1) attaching cover together.
5. Remove cover from foam.

INSTALLATION




1. Install bolster cover onto the foam.
2. Install three hog rings (1) attaching cover together.
3. Install push pin fasteners attaching upper retainer.




4. Install the two bolster mounting brackets.
5. Install rear seat bolster into vehicle.