Parking Lamp: Service and Repair

PARK/TURN SIGNAL LAMP

REMOVAL




1. Remove headlamp access cover in splash shield.




2. Rotate socket (1) counterclockwise one quarter turn.
3. Remove bulb and socket (1) from headlamp unit.
4. Disconnect wire connector (1) from back of front side marker/park/turn signal lamp.

INSTALLATION




1. Connect wire connector (1) to the back of front side marker/park/turn signal lamp.
2. Install bulb into headlamp unit
3. Rotate socket (1) clockwise one quarter turn.




4. Install headlamp access cover into splash shield.