Air Cleaner Housing: Service and Repair

HOUSING-AIR CLEANER

REMOVAL





1. Disconnect the throttle body air inlet hose/clean air hose (1) from the air cleaner housing (2).
2. Pull air cleaner housing (2) straight up to remove.
3. Remove the inlet duct (3) from the air cleaner housing (2).

INSTALLATION





1. Install inlet duct (3) to the air cleaner housing (2).
2. Make sure the rubber grommets, for the air cleaner housing lower pins, are in place when reinstalling the air cleaner housing (2). The rubber grommets mount to the PDC bracket (4).
3. Push air cleaner housing (2) down while aligning pins into the grommets.
4. Connect the throttle body air inlet hose/clean (1) air hose to the air cleaner housing (2).