Shroud-Upper

SHROUD-UPPER

REMOVAL
1. Position the column tilt at the full-downward position.





2. Remove the two screws (4) attaching the upper shroud (1) to the lower shroud (2). After removing the screws, unclip the shrouds from each other by applying hand pressure along the seams where the shrouds connect on the sides, then remove the upper shroud.

INSTALLATION
1. Position the column tilt at the full-downward position and lock it in place.





2. Install the upper shroud over the lower shroud, clipping the shrouds to one another.
3. Install the two screws (4) attaching the upper shroud (1) to the lower shroud (2).