Manual
REMOVAL1. Remove watershield.
2. Remove inner belt molding.
3. Remove door glass.
Front Door Manual Window:
4. Loosen screws attaching front and rear window guide rails to inner door panel.
5. Remove screw heads on guide rails from key hole slots in inner door panel.
6. Loosen screws attaching regulator to inner door panel.
7. Remove regulator from inner door panel.
8. Extract rear guide rail through inner door panel rear access hole.
9. Extract front guide rail through front access hole.
INSTALLATION
Front Door Manual Window:
1. Insert front guide rail through front access hole.
2. Insert rear guide rail through rear access hole.
3. Place window regulator in position on inner door panel.
4. Place screw heads on guide rails in position through key hole slots in inner door panel.
5. Tighten screws to attach front and rear guide rails to inner door panel to 8.5 -1 0.7 N.m (75 -9 5 in. lbs.). Tighten using the sequence.
6. Tighten screws to attach regulator to inner door panel to 2.8 N.m (25 in. lbs.).
7. Install door glass.
8. Verify door glass alignment and operation.
9. Install inner belt molding.
10. Install watershield.