C1078

C1078-TIRE REVOLUTIONS RANGE PERFORMANCE

For a complete wiring diagram Refer to Diagram/Electrical. Electrical Diagrams


- When Monitored:

Continuous.

- Set Condition:

Programmed value for tire size is not within acceptable range.







Diagnostic Test


1. INCORRECT VALUE PROGRAMMED INTO FCM






NOTE: ABM initialization procedure needs to be run for the new tire size to be accepted.

Verify the correct Tire/wheel information is programmed in the FCM.

Is the correct value programmed in the FCM according to the chart?

Yes

- Test complete.
- Perform ABS VERIFICATION TEST. ABS Verification Test

No

- Program the correct Tire/Wheel information in the FCM.
- Perform ABS VERIFICATION TEST. ABS Verification Test