Installation

INSTALLATION

Durango





CAUTION: Do not use a hammer or mallet to install the upper radiator shroud push pins, due to potential damage to the grille.

1. Install the grille (2) and seat the side clips fully.

2. From underneath install the push pin fasteners (3).

3. Install the upper screws (1) and tighten to 13 Nm (10 ft. lbs.).

4. Install the upper radiator shroud and install the push pin fasteners.

Aspen





CAUTION: Do not use a hammer or mallet to install the upper radiator shroud push pins, due to potential damage to the grille.

1. Install the grille (3).

2. From underneath install the four screws (2) and tighten to 13 Nm (10 ft. lbs.)..

3. Install the upper four screws (1) and tighten to 13 Nm (10 ft. lbs.).

4. Install the upper radiator shroud and install the push pin fasteners.