Power Windows

B210E-BATTERY VOLTAGE HIGH

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

When a power opening or closing operation is not occurring.

- Set Condition:

Anytime the Power Liftgate Module senses voltage input above 16 volts when a power opening or closing operation is not occurring, this code will set.





Diagnostic Test

1.CHECK ENGINE DTC's

With the scan tool, read ENGINE DTC's

Are there any ENGINE DTC's present?

No

- Go To 2

Yes

- Refer to symptom list for problems related to ENGINE.

2.TEST FOR INTERMITTENT CONDITION

With the scan tool, record and erase DTC's

Start the engine and run for two minutes.

With the scan tool, read DTC's.

Does the scan tool display B210E-BATTERY VOLTAGE HIGH?

Yes

- Replace the Power Liftgate Module.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test