Removal

REMOVAL





WARNING: Do not disconnect the support rod cylinders with the liftgate closed. The support rod pistons are operated by high pressure gas. This pressure could cause damage and/or personal injury if they are removed while the pistons are compressed.

1. Open and support the liftgate.

2. Disconnect the power liftgate link rod, if equipped.

3. Using a trim stick C-4755 or equivalent, remove the upper rear headliner trim.

4. Remove the support cylinders from the liftgate.

5. Disconnect the wire harnesses and the washer hose.

6. Using a grease pencil or equivalent, mark the hinge location.

7. Remove the six liftgate to body bolts (1) and remove liftgate from vehicle.