Removal

REMOVAL

DURANGO





1. Disconnect and isolate the battery negative cable.

2. Remove the overhead console assembly (3).

3. Using trim stick C-4755 or equivalent, pry the back edge of the power liftgate switch (1) up until the two retaining tabs (2) are fully released.

4. Tilt the power liftgate switch (1) up away from the overhead console assembly (3) until the mounting tab on the opposite side of the switch releases.

5. Remove the switch from the vehicle.

ASPEN





1. Disconnect and isolate the battery negative cable.

2. Remove the overhead console assembly (3).

3. Using trim stick C-4755 or equivalent, pry the side edges (4) of the overhead console assembly out until the two retaining tabs on the power liftgate switch (5) are fully released.

4. Push the switch (5) out through the back of the overhead console (3).

5. Remove the switch from the vehicle.