Installation

INSTALLATION




1. Raise axle into position.
2. Loosely install nuts and bolts (1) in engine mount.




3. Loosely install nuts and bolts (2) in pinion nose bracket.




4. Loosely install bolts (2) in axle tube mount.




5. Tighten all the bolts finger-tight, then tighten all bolts to 95 Nm (70 ft. lbs.).
6. Install the axle vent tube.
7. Install propeller shaft with reference marks aligned.
8. Install half shafts.
9. Install support crossmember (2).
10. Install half shafts.
11. Install hub bearing and brake shield.
12. Install brake components.
13. Install half shafts.
14. Install skid plate, if necessary.