Removal

REMOVAL




1. Open hood.

2. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.

3. Remove the passenger airbag from the vehicle.

4. Unsnap cover from passenger airbag and remove by lifting the airbag cover up towards the hinge.

5. Reach in under the cover and push down on the metal flap running the length of the top of the airbag housing.

6. Maneuver airbag cover out of the airbag housing.