Instrument Panel End Cap - Installation

INSTALLATION

DRIVER SIDE

1. If removed, install the power mirror switch onto the driver side instrument panel end cap.

2. Position the driver side instrument panel end cap to the instrument panel and if equipped, connect the wire harness connector to the power mirror switch.

3. Install the driver side instrument panel end cap onto the instrument panel. Make sure the snap retainers are fully engaged to the instrument panel.

4. Install the screw that secures the driver side instrument panel end cap to the instrument panel. Tighten the screw to 2.2 Nm (20 in. lbs.).

5. Install the steering column opening cover.


PASSENGER SIDE

1. Position the passenger side instrument panel end cap to the instrument panel.

2. Install the two screws that secure the passenger side instrument panel end cap to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).

3. Install the glove box bin.