Removal - Convertible

REMOVAL - CONVERTIBLE




1. Remove the sun visor and sun visor retainer.

2. Using a trim stick C-4755 or equivalent, release the snap retainers that secure the header center molding (2) to the inside of the windshield surround frame (1).





3. Using a trim stick C-4755 or equivalent, release the three snap retainers (1) that secure each header end molding (2) to the inside of the windshield surround frame (3).

4. Remove each header end molding from the windshield surround frame and if equipped, route the sun visor wire harness connector (4) through the molding.