Installation

INSTALLATION

WARNING: Before servicing the seat back cover the airbag system must be disarmed. Failure to do so may result in accidental deployment of the airbag and possible personal injury. Refer to restraint systems for service procedures.

1. For front seat illustrations.

2. Install the seat back cover (2) and cushion to the frame (12).

3. Install the hog rings to secure the seat cover to the seat cushion.

4. Install the heated seat harness retainers.

5. Install the seat back frame lower shield.

6. Install the inboard (3) and outboard (4) headrest guides.

7. Install the seat airbag (19).

8. Install the lumbar handle (16) and clip.

9. Zip the seat back cover zippers.

10. Install the J-strap to the bottom of the seat back.

11. Install the seat back shield (if equipped).

12. Install the headrest (5).

13. Install the front seat back.