Installation

INSTALLATION





When servicing throttle body components, always reassemble components with new O-rings and seals where applicable. Never use lubricants on O-rings or seals, damage may result. If assembly of component is difficult, a light coat of engine oil may be applied to the O-RINGS ONLY to aid assembly.

1. The new idle air control motor has a new O-ring installed on it.




2. Carefully place idle air control motor into throttle body.

3. Install mounting screw. Tighten screw to 7 Nm (62 in. lbs.) torque.

4. Connect electrical connector to idle air control motor.

5. Connect negative cable to battery.