Description

DESCRIPTION

The drivers side seat belt switch is a normally open, single pole, single throw, plunger actuated, momentary switch. installed on the seat belt retractor frame over the retractor spool. The passenger side seat belt switch is a similar switch located within the buckle mechanism. The seat belt switch includes an integral connector that is connected to the vehicle electrical system through a take out and connector of the body wire harness.

The seat belt switch cannot be adjusted or repaired and, if ineffective or damaged, the entire front seat belt and retractor (drivers side) must be replaced.

NOTE: If the passenger side seat belt switch is found to be causing a fault the entire buckle assembly must be replaced. Fault determination can be achieved using a scan tool and the proper DTC diagnostics.