Condition - Door Glass Not Driving Into the Top In Full Up Position

GLASS ALIGNMENT DIAGNOSIS

CONDITION - DOOR GLASS NOT DRIVING INTO THE TOP IN FULL UP POSITION





1. Verify that the door glass and quarter glass adjustment procedures have been checked.

2. Close and latch top.

3. With vehicle's engine running, raise door glass full up.

4. Adjust cross car screw (3), if the door glass is not going into the top seal.

5. With vehicle's engine running, lower door glass and then raise door glass full up. Verify that glass is going into the top seal. If adjustment is still required repeat Steps 3 though 6.

6. With vehicle's engine running, lower door glass and then raise quarter glass full up, and then raise door glass full up and verify that the door glass is going into the top seal. If adjustment is still required repeat Steps 3 though 7.