Removal

REMOVAL

WARNING: Review safety precautions and warnings before performing this procedure. Failure to follow the warnings and cautions could result in possible personal injury or death.




1. Recover the refrigerant from the refrigerant system.

2. Remove the upper radiator support.

3. Remove the bolt (2) that secures the A/C discharge line (1) to the A/C compressor (3).

4. Disconnect the A/C discharge line from the A/C compressor and remove and discard the O-ring seal.

5. Install plug in, or tape over the opened discharge line fitting and the compressor discharge port.




6. Remove the nut that secures the A/C discharge line (3) to the A/C condenser (1).

7. Disconnect the A/C discharge line from the A/C condenser and remove and discard the O-ring seal.

8. Install plug in, or tape over the opened discharge line fitting and the condenser port.