Removal

REMOVAL

NOTE: Before proceeding, refer to SUSPENSION FRONT WARNING.

1. Raise and support the vehicle.




2. On both sides of the vehicle, remove the stabilizer bar link assembly (3, 4, 6, 7) from the vehicle. Remove each link by holding the upper retainer/nut (3) with a wrench and turning the link bolt (7).
3. On both sides of the vehicle, remove the stabilizer bar cushion retainer bolts (8) and retainers (9), then remove the stabilizer bar (3) with cushions attached from the vehicle.
4. Remove the stabilizer bar (5) with cushions (10) from the vehicle.
5. To remove the cushions (10) from the stabilizer bar (5), peel back each cushion at the slit and roll it off the bar.